Antibacterial and photocatalytic behaviour of green synthesis of Zn0.95Ag0.05O nanoparticles using herbal medicine extract

The present work aimed to synthesize Zn_0.95Ag_0.05O (ZnAgO) nanoparticles using rosemary leaf extracts as a green chemistry method. The characterization of Ag-doped ZnO nanoparticles was performed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and ultraviolet–visible spectrophotometry (UV–visible). The XRD, FTIR, and UV–visible spectra confirmed the formation of the presence of hexagonal ZnAgO nanoparticles. FESEM micrograph shows that the nanoparticles have been distributed homogeneously and uniformly. The morphology of ZnAgO nanoparticles is quasi-spherical configuration. Also, the mean particle size is in the range of 22–40 nm. The photocatalytic degradation of methylene blue in the presence of Ag-doped ZnO nanoparticles is nearly 98.5% after exposing 100 min. The ultraviolet lamp was used as the light source for photocatalyst degradation. The disc diffusion method was chosen to study the antibacterial activity of as-synthesized ZnAgO nanoparticles. Antibacterial activity of Zn_0.95Ag_0.05O nanoparticles against Staphylococcus aureus and Escherichia coli revealed that the as-synthesized ZnAgO nanoparticles were efficient in inhibition of bacterial growth.     

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

In the family of inorganic nanomaterials, zirconia is a highly promising functional ceramic with a high refractive index, hardness, and dielectric constant, as well as excellent chemical inertness and thermal stability. These properties are enhanced in nano-zirconia ceramics, because nanopowders have a small particle size, good morphology, and uniform and dispersive distribution. In this study, a co-precipitation process was proposed to synthesise highly dispersed MgO–Y₂O₃ co-stabilized ZrO₂ nanopowders. The effects of different calcination temperatures on the crystallisation degree and particle dispersion of zirconia nanopowders were characterised by X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption using the Brunauer–Emmett–Teller (BET) theory, transmission electron microscopy (TEM), and field emission scanning electron microscopy (FESEM). The optimum synthesis conditions were obtained as follows: 6 h of high-energy planetary grinding and calcination at 800 °C in an electric furnace. Under these optimum conditions, the average particle size of the prepared powder was 28.7 nm. This process enriches the literature on the controllable preparation of Mg–Y/ZrO₂ nanopowders obtained by the co-precipitation method.     

P2型锰基钠离子正极材料的制备与改性

实验以碳酸钠为钠源，采用溶胶-凝胶法分别合成钠离子正极材料Na_0.46Ni_0.26Mn_0.54O₂ 和含有部分铁离子的正极材料Na_0.46Ni_0.13Fe_0.13Mn_0.54O₂.两者均在相同的条件和相同煅烧温度下合成.分别讨论这两种材料结构上的差异和性能上的变化.利用X射线衍射仪观察两种材料的晶体结构、扫描电子显微镜观察两种材料的组织形貌.将合成的材料做成电池，分别进行电化学的测试.结果表明:不添加Fe元素的材料，即S1:Na_0.46Ni_0.26Mn_0.54O₂具有层状结构，呈现P2结构、形貌呈现为片束形状态，粒径大小均匀，且电池的电化学性能更佳.而添加了铁元素的材料即S2:Na_0.46Ni_0.13Fe_0.13Mn_0.54O₂，无论从结构、形貌和电化学性能来比较，都次于P2型结构的Na_0.46Ni_0.26Mn_0.54O₂.      

Fabrication and properties of Si3N4 based ceramics using combustion synthesized powders

Silicon nitride (Si₃N₄) based ceramics were fabricated with β-SiAlON and Si₃N₄ powders synthesized by combustion synthesis method via power injection molding (PIM). In the PIM process, the solids loading for each material was first determined from the results of the torque rheometer experiment. The mixing process was repeated to produce the homogeneous feedstock, and homogeneity of feedstocks was evaluated by observing the shear viscosity with time at a constant shear rate. The rheological behavior of feedstocks was investigated using capillary rheometer. It found that both feedstocks have no problem in injection molding. The binder decomposition behavior was also investigated, and a wax-polymer binder system was nearly removed by the optimized solvent and thermal debinding processes. Thereafter, the debound samples were sintered at 1750 and 1800 °C for 4 h in nitrogen atmosphere. Regardless of sintering temperature, the relative density of higher than about 96% was achieved. When comparing mechanical properties including bending strength, Vickers hardness and fracture toughness, Si₃N₄ with 2 wt% Y₂O₃ and 5 wt% Al₂O₃ (Si₃N₄+2Y5A) had higher values than β-SiAlON with 4 wt% Y₂O₃ (β-SiAlON+4Y) regardless of sintering temperature. It was supported by observing the microstructures of the plasma-etched samples.     

Synthesis and characterization of hydrogenated novel AlCrFeMnNiW high entropy alloy

A novel high entropy alloy (HEA) i.e. AlCrFeMnNiW is synthesized via high-energy planetary ball milling with an average crystallite size of 10.37 nm. The morphology study of hydrogenated and dehydrogenated HEA is carried out through Scanning Electron Microscope (SEM). The HEA is charged with hydrogen using inhouse Sievert's Apparatus which results to be maximum hydrogen storage capacity of 0.615 wt% at atmospheric pressure and temperature. The dehydrogenation of the sample is performed through thermogravimetry (TG) at different scanning rate. The crystalline structure (i.e. lattice parameters) and chemical composition of HEA is studied using X-Ray Diffraction (XRD) and Energy Dispersive X-Ray analysis (EDX) respectively. The unit cell volume of as-prepared alloy is estimated as 0.03131 nm³ whereas the average crystallite size as 10.37 nm. It is observed that the unit cell volume is increased by 0.67% and crystallite size decreased by 10.8% upon hydrogenation whereas it is then decreased by 0.2% and increased by 6.7% respectively upon dehydrogenation. Activation energy during hydrogen desorption is found to be −8.161 kJ/mol. The enthalpy and entropy of the mixing are estimated to be −2.645 kJ/mol and 1.793 R J/mol K.     

Reactive wetting behavior and mechanism of AlN ceramic by CuNi-Xwt%Ti active filler metal

In order to propel the application of the developed CuNi-Xwt%Ti active filler metal in AlN brazing and get the universal reactive wetting mechanism between liquid metal and solid ceramic, the reactive wetting behavior and mechanism of AlN ceramic by CuNi-Xwt%Ti active filler metal were investigated. The results indicate that, with the increasing Ti content, surface tension for liquid CuNi-Xwt%Ti filler metal increases at low-temperature interval, but very similar at high-temperature interval, which influence the wetting behavior on AlN ceramic obviously. CuNi/AlN is the typical non-reactive wetting system, the wetting process including rapid wetting stage and stable stage. The wettability is depended on surface tension of the liquid CuNi filler metal completely. However, the wetting process of CuNi-8wt.%Ti/AlN and CuNi-16 wt%Ti/AlN reactive wetting system is composed by three stages, which are rapid wetting stage decided by surface tension, slow wetting stage caused by interfacial reaction and stable stage. For CuNi-8wt.%Ti/AlN and CuNi-16 wt%Ti/AlN reactive wetting system, although the surface tension of liquid filler metal is the only factor to influence the instant wetting angle θ₀ at rapid wetting stage, the reduced free energy caused by interfacial reaction at slow wetting stage plays the decisive role in influencing the final wettability.     

Preparation of highly crystalline titanium-based ceramic microfibers from polymer precursor blend by needle-less electrospinning

The aim of the present contribution is to study the influence of the post-spinning heat - treatment of single TiO₂/PVP precursor fibers on the properties and morphology of the final titanium-based microfibers. The post-spinning treatment conditions were: calcination in air at 450–600?°C and pyrolysis in argon at 1000–1700?°C. Calcination resulted in a production of anatase-rich and pure rutile fibers. The use of an alternative sintering method, the low-temperature plasma treatment, led to the crystallization of the composite Magnéli phases/polymer fibers. As a result of the same one precursor, pyrolysis at 1000?°C, the Carbon/TiO₂ composite fibers were obtained. Rising the treatment temperature in inert atmosphere led to the formation of the titanium carbide fibers. The formation process and all the obtained products were characterized by differential scanning calorimetry accompanied with thermogravimetric analysis (DSC/TGA), scanning and transmission electron microscopy (SEM, TEM), X-ray diffraction (XRD), and image analysis techniques.     

Al-doping induced superior lithium ion storage capability of LiNiO2 spheres

To optimize the performance of LiNiO₂ with minimal modification of the pristine structure, a facile solid-state approach, based on the interdiffusion of elements at the solid/solid interface, is developed to achieve uniformly Al-doped LiNiO₂ using alumina coated Ni(OH)₂ spheres as the precursor. The resulting LiNi_0.95Al_0.05O₂ material exhibits excellent discharge capacity (209.9 mAh g⁻¹ at 0.1 C) and cycling stability with a capacity retention of 85.10% after 200 cycles at 0.5 C. This is ascribed to the improved reversibility of the phase transitions by Al-doping as revealed by in-situ XRD characterization. The Al-doping also endows the material with superior rate capability due to the enlarged interlayer spacing in the structure and alleviation of the side reactions at the electrode/electrolyte interface, favorable for lithium ion diffusion. An optimal amount of doped Al is necessary for ensuring the structure stability and interface ionic conductivity of the LiNiO₂ spheres. Thus, the present strategy may provide an opportunity to optimize the performance of LiNiO₂, with uniform doping of a small amount of Al, producing a promising cathode material for advanced lithium ion batteries.     

Iron mediated cathodic electrosynthesis of hausmannite nanoparticles

A novel synthetic route has been proposed to prepare hausmannite nanoparticles. The synthetic route comprises an iron mediated constant current cathodic electrodeposition of manganite and heat treatment of the latter to obtain hausmannite. The obtained nanostructures have been characterized using X-ray Diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and Fourier transform Infrared Spectrometry (FTIR). The role of iron in the formation of manganite precursor has been studied by cyclic voltammetry (CV) and differential thermal analysis (DTA). A formation mechanism based on iron mediated formation of Mn³⁺ and subsequent cathodic reduction of the disproportionated products has been proposed accordingly. The prepared nanoparticles exhibited specific capacitance of 143 F g⁻¹ in 0.5 M Na₂SO₄ solution. The retained specific capacity was 87% after 2000 cycles.     

Microstructure stabilization of a novel glass/YSZ composite coating material by adding alumina particles

Glass-based composite coating materials incorporating particles of alumina or YSZ were prepared by reaction sintering. It was revealed that phase evolution played a key role on thermal expansion behavior of the composite coating materials. Both precipitating of t-ZrO₂ crystals and adding YSZ inclusions could raise CTEs of the glass-based matrix, while the formation of zircon produced the reverse effect. Especially, alumina additives retarded the crystallization of the base glass and reduced reaction rates between YSZ and the glass matrix remarkably. Thus, the Al₂O₃/YSZ/glass tri-composites could serve as an environmental barrier coating for intermetallics and superalloys because of the stabilized microstructure.